What Is The 7 Step Cleaning Process?

What are the 7 steps in the 7 step cleaning process?

Upon reentering the room, clean PPE must be worn.Step 1: Remove general waste.

Step 2: High dust.

Step 3: Clean & disinfect all flat surfaces.

Step 4: Clean & Disinfect restroom.Step 5: Dust Mop floor: …

Step 6: Stock supplies and perform final inspection: …

Step 7: Wet Mop floor:.

What are the 3 methods of sanitizing?

Heat. There are three methods of using heat to sanitize surfaces – steam, hot water, and hot air. Hot water is the most common method used in restaurants. If hot water is used in the third compartment of a three-compartment sink, it must be at least 171oF (77oC).

What order should I clean and sanitize?

It is important that the clean, sanitized equipment and surfaces drain dry and are stored dry so as to prevent bacteria growth….The correct order of events for cleaning/sanitizing of food product contact surfaces is as follows:Rinse.Clean.Rinse.Sanitize.

How long should it take to clean a bathroom?

20 to 45 minutesIf you tackle that bathroom like the pros, you can get away with cleaning the bathroom less often. If your bathroom is dingy and not smelling fresh, it’s probably time for a more thorough cleaning. To get everything shiny and germ-free, expect it to take from 20 to 45 minutes to clean a bathroom.

What is the best product to clean bathrooms?

Here are the best bathroom cleaning products you can buy:Best wipes: Clorox Disinfecting Wipes.Best toilet cleaner: Clorox ToiletWand Disposable Toilet Cleaning System.Best tub cleaner: The Bucko Soap Scum & Grime Cleaner.Best scrub brush: OXO Good Grips All-Purpose Scrub Brush.More items…•

What are the steps in a cleaning procedure quizlet?

Terms in this set (15)Disassemble. take apart all instruments, shafts handles, caps.Soak. -long instruments @ top. … Flush. Flush, clean rinse all sharps. … Brush. p/u each item from right of sink and brush with soft brush. … Rinse. -rinse all instruments thoroughly. … White Towel Test. … Lubricate. … Dry.More items…

What is the 3 step cleaning process?

Equipment will still need to be washed to remove dirt and other substances. The 3 Step Process must be used at all times to wash, rinse, and sanitize in the classroom. Spray or immerse object with/in soapy water and remove dirt.

What is the first step of cleaning?

What are the 6 stages of cleaning?Pre-clean – remove excess food waste by sweeping, wiping or pre-rinsing.Main clean – loosen surface waste and grease using a detergent.Rinse – remove loose food waste, grease and detergent.Disinfection – kill the bacteria with disinfectant or heat.Final rinse – remove the disinfectant.Drying – remove all moisture.

What are the steps in the cleaning process?

As a guide, we have provided a comprehensive 6 step procedure for cleaning and sanitizing any area, whether it be in your home, or commercial premises:-Inspection. First, take a look at the area you are about to clean. … Sweep/flush. The next step is to get rid of any visible mess or debris. … Wash. … Rinse.

What is the correct order of tasks for washing dishes?

Step 1: Rinse and Wash Out Your Sink. Step 2: Fill Sink Up With Soapy Water. Step 3: Let Dish Soak in Water. Step 4: Place Dish Soap on Brush or Sponge.

What is the 4 step sanitizing process?

4 Steps to Cleaning & Sanitizing Tables Clean the surface with an appropriate cleaner. After cleaning, thoroughly rinse the surface with clean water. Apply a sanitizing solution to the surface. You can use a quat-based or chlorine-based sanitizer. … Allow the sanitizer to air dry on the surface.

What are the 6 stages of cleaning?

The 6 main stages in cleaning are: pre-clean, main clean, rinse, disinfect, final rinse, drying. Any cloths and equipment used for cleaning can be a source of contamination if not cleaned properly.

When cleaning a restroom where do you start?

Clean your bathrooms fast and efficiently by using this 10-step process.Remove all items from their usual spot. … Dust and sweep. … Apply cleaner to shower and bathtub. … Tackle other surfaces. … Mix cleaning solution for floor. … Hit the shower and bathtub. … Finish the shower and bathtub. … Clean the vanity area.More items…•

How do I clean and sanitize a table?

First, use a soapy water solution to clean tables using a clean disposable paper towel, and 2. Second, after cleaning the table surface with soap or detergent and rinsing with water, disinfect tables by using a diluted bleach water solution – according to directions listed below.

How often should I clean the bathroom?

Once a week at least. Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.