- How long do treated posts last in concrete?
- Should fence posts be set in concrete?
- Why deck posts should not be set in concrete?
- How long will a pressure treated post last in the ground?
- Should I use 4×4 or 6×6 deck posts?
- How many bags of concrete do I need for a 4×4 fence post?
- How do you keep fence posts from rotting in concrete?
- Will fence posts rot in concrete?
- Is it OK to set deck posts in concrete?
- Do deck post need to be in concrete?
- Is 2 feet deep enough for fence posts?
- What should I put between wood and concrete?
How long do treated posts last in concrete?
5 to 10 years5 Answers.
A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone.
I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don’t let the PT post come in contact with the ground..
Should fence posts be set in concrete?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.
Why deck posts should not be set in concrete?
A deck post should always be placed on top of footing, not inside concrete because it can break. The photo on the left shows a post set in a bracket that has been mounted to the top of a footer. The photo on the right shows a post that has concrete poured around it, which can lead to a crack like you see here.
How long will a pressure treated post last in the ground?
3) A deck built with pressure treated wood will last a long time. Promotional literature promises lifelong performance for pressure treated wood. The Forest Products Laboratory and other research groups have shown that treated wood stakes placed in the ground for more than 40 years remain rot-free.
Should I use 4×4 or 6×6 deck posts?
4×4 post will be fine. I have built many decks for new homes with them. 6×6 is more sturdy of course and will not twist as easy, but for structure purposes, 4×4 will be fine.
How many bags of concrete do I need for a 4×4 fence post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
How do you keep fence posts from rotting in concrete?
Tamp down the gravel. You can use concrete, if desired, but the moisture in the concrete can sometimes cause wooden posts to rot more quickly, while the gravel allows water to drain quickly away from the fence post and into the soil.
Will fence posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … First, the posts should be set on top of a bed of coarse gravel 3 to 6 inches deep, so the base of the post is in contact with the gravel.
Is it OK to set deck posts in concrete?
There are several ways to set deck posts; we recommend attaching the posts to concrete footers above the ground. This helps to prevent wooden posts from rotting. Set footers a minimum of 6” below the frost line for your area to prevent movement during freezing temperatures.
Do deck post need to be in concrete?
You’ll need the post layout marked before you begin. … There are several methods for setting posts. One way is to pour concrete in the post hole, set the post on the concrete and backfill with gravel. To help prevent rotting, this deck will have wooden posts attached to concrete footers above ground.
Is 2 feet deep enough for fence posts?
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post’s aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
What should I put between wood and concrete?
Anyplace where wood meets the ground or concrete, the lumber must be pressure treated. For additional moisture protection, a gasket or strip of closed-cell foam can be installed between the concrete foundation and the sill plate.