Question: Does It Matter If Venetian Blinds Are Too Long?

Are blinds supposed to touch the window sill?

In most cases blinds look and work the best when they rest on the window sill.

No one is ever going to notice extra 1/2″ of length and this keeps them from blowing in a slight breeze.

If there isn’t a sill, then you should measure the length to the point where the blinds are to reach..

How do you remove mini blinds with hidden brackets?

Hidden bracket, principle: never pull down to remove. push top headrail in to losen the bottom rear. Then lift rear. if you can’t find any visual clue, roll the shades all the way down, use a flathead screwdrive to push up middle of bracket while pulling the headrail away from the window glass.

How do you shorten a vertical blind track?

The quick and dirty way to shorten a vertical blindRemove each slat from the headrail.Remove the weight.Find the back of the slat.Cut across one side of the pocket, to create one length.Measure the length and mark where you now want the bottom to be.Fold your slat and measure the length again, to be sure it’s correct.More items…

How do you cut fabric blinds that are too wide?

Cutting down the slatsAlign the slats so that they are even.Using a clamp or rubber bands, secure the slats together into position.Wrap the slats with masking tape to prevent chipping.Measure where you want to cut and mark a line with your pencil. … Lay them on the saw and line up the blade where you need to cut.More items…

Do dunelm cut blinds?

Blind drop – generally the drop on vertical and venetian blinds will need adjusting to ensure better operation and light control. All Dunelm aluminium and wood venetian blinds and vertical blinds can be cut to size and reduced in drop.

How does a venetian blind work?

The venetian blind tilt mechanism is used to operate the blind slats. The tilt mechanism is connected to a tilt wand or cord through threading, which you can use to angle the slats. You can twist the tilt wand clockwise or anti-clockwise or pull one end of a two way cord to open and close the slats.

Can you cut the length of Venetian blinds?

Shortening Venetian Blinds is actually pretty simple and can be done yourself at home. By opting for made to measure blinds you’ll eliminate the need to make alterations however ready-made blinds usually offer a cheaper alternative.

Do blinds have to fit exactly?

You’re right in thinking that your blinds need to be slightly smaller than the window. But, all of our blinds and shades require slightly different deductions to height and width for the perfect fit. … Just give us the exact size of the window opening and we’ll make blinds that fit perfectly.

Which is better inside or outside mount blinds?

If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.

How much should I deduct for interior mount blinds?

When you specify inside mount, we will make a size deduction to allow for operating clearance. We will deduct up to 1/4″ from each side (on vertical blinds there is also a height deduction of 1/4″). The deductions are made so that the blind will not rub or scratch your window frame.

Should Venetian blinds sit on windowsill?

Note: Ideally the length of the blind should allow the bottom of the blind to sit ¼ inch above the window sill.

Is it OK if blinds are too long?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

How much longer should your blinds be?

Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.