Does AutoZone Charge To Read Codes?

How do I get the check engine light to go off?

The simplest most straightforward way to get rid of the check engine light is to drive it for a little bit, and the light will turn off by itself.

Once you drove your car for a couple of days (e.g., usually three days), the check engine light should be gone..

How much does AutoZone charge to check codes?

It can cost $200 at the dealer just to have the problem diagnosed. But you may not realize you might be able to get that problem checked for free at AutoZone or your other local auto parts stores.

Does AutoZone read codes for free?

AutoZone gives you a FREE, easy-to-read MYZONE HEALTH REPORT, which includes relevant codes, and details the action that needs to be taken.

Where can I read car codes for free?

Free Code Reading If you have a problem with your car and you don’t know what it is, most auto part stores (such as AutoZone, Pep Boys and Advance Auto Parts) will provide a free diagnostic code reading. It is also called an OBD reading. OBD stands for On Board Diagnostics.

Where can I get my check engine light checked for free?

Auto parts store. AutoZone is well known for doing free check engine light diagnostics. Just go into the store and ask someone behind the counter.

Does O’Reilly scan codes for free?

O’Reilly Auto Parts offers free check engine light testing to help you diagnose the problem. Most of our stores can loan you a code reader for OBD 1&2 systems for vehicles from 1996 and up, except in areas where it is prohibited by law.

How do I read odb2 code?

Inserting and Reading an OBD ScannerStep 1: Locate your vehicle’s OBD port. … Step 2: Plug your OBD scan tool into the connector. … Step 3: Read the codes in the computer. … Step 4: Record the codes that display. … Step 2: Determine the meaning of the letter.

Does AutoZone lend code readers?

We can help you get a reading yourself. Borrow an OBD reader to get a Check Engine Light reading with the AutoZone Free Fix Finder Service. It’s a simple task that takes less than two minutes.

How long does a diagnostic test take?

A standard diagnostic test can take about an hour to an hour and a half. Of course, more complicated issues that require further diagnosis and where components must be removed for access or testing can take 2-3 hours; depending on the severity of the issue or multiple underlying issues.

Are car code readers worth it?

Because these devices are cheap and easy to use, code readers are convenient for car owners and mechanics who want to read and clear diagnostic codes. Scan tools are more expensive but can do everything a code reader can do, as well as provide troubleshooting tips, data readouts, and diagnostic equipment.

How do I find out my engine code?

You can find the VIN in the lower corner of your windshield on the driver’s side. In the series of numbers and letters, the tenth from the left denotes the model year and the eighth is the engine code. Just tell the store clerk those two characters and you’re in business.

How do I run a diagnostic on my car?

Read the Car Code(s)Turn on the diagnostic tool. Basic tools should have a simple power button somewhere on the unit. … Access the diagnostic scanner. Some scanners will automatically start to read the car codes once powered on. … Record the data. … Optional: Clear the codes.

Can AutoZone read VW codes?

You can get a code read for free at AutoZone, and other similar places, but then you’ll have to figure out what malfunction caused it – and AutoZone won’t tell you that for free either. A diagnosis will include reading the code and tracing the cause down to the most likely failing part.

How accurate is AutoZone diagnostic?

Autozone’s free diagnostic check is not extremely reliable. What they refer to as a “diagnostic check” is just having a code scanner hooked up to the vehicle’s computer. … In fact, most vehicles having issues will have multiple error codes showing.

What are P codes?

For specific place, point, or positional locations, the geo-codes have come into common usages as P-codes (abbreviated for Place-code). These terms can be essentially interchange as long as one recognizes the focus on “position or place” for P-codes.

Can you use a code reader on a car that won’t start?

If the car is cranking, but won’t start, use an OBD2 scanner to find out if there are any stored trouble codes in the trouble code memory. By reading the trouble codes, you can skip over a lot of the troubleshooting steps and jump directly to troubleshooting the part that you got the trouble code for.

Can AutoZone tell you what’s wrong with your car?

If your check engine light is on and you need to figure out what’s wrong, come to your local AutoZone and ask about Fix Finder. … AutoZone gives you a FREE, easy-to-read MYZONE HEALTH REPORT, which includes relevant codes, and details the action that needs to be taken.